Product Introduction

This product is a smart carbon monoxide sensor adopts super low power consumption Zigbee wireless networking technology. used for detecting carbon monoxide. Sensor adopts high performance electrochemical sensor, support sound and flash alarm. It has high stability. super low power consumption, little Sensitivity drift and many other features. Free installation design, support instant bonding

Technical Data:

1. Working Voltage: DC3V (CR123A or CR17335 Lithium Battery)

2. Alarm Sound: > 85dB/1m

3. Alarm Sensitivity: 30ppm 120mins alarm

 50ppm 60~90mins  alarm

100ppm 10-40mins alarm

300ppm 3mins alarm

4. Networking: Zigbee Ad-Hoc Networking

5.Wireless Networking Distance: <70m (open area)

6.Working Temperature: -10°C~+50°C

7.Environment Humidity: < 95%RH

8 Dimension. 60×60X492mm

Tips

1. This product can not be used for detecting natural gas(methane). propane. butane and other combustible

gas

2.Clean once a month, users may use household vacuum cleaner and soft brush when cleaning

3 Do not use cleanser or solvent wipe sensors. please avoid spraying air freshener ,hair spray, oil paint or other aerosol near sensors

4 Effective working life Span is 5 years. suggest replace every 5 years no matter there is fault or not. (Battery life span is 3 years).

5: Please be attention when alarm happens. Shut-off valves immediately. opening the window. make sure indoor airiness. Besides using sensors correctly users Should strengthen the consciousness of fire Protection.

Installation Instruction

1.Install the sensor in bedroom and living area or anywhere CO may leak. make sure each sleeping

area can hear sound alarm when choose installation position.

2.Avoid suppressing or falling down sensors. keep sensors away from humid. high voltage. strong magnetic and children.

3.Do not suggest install sensors in garage, kitchen, boiler and Places where sensor may false alarm. Do not install in dirty, dusty or greasy places. oily, dust or household chemicals may damage internal sensor. and make sensor can not work normally.

4 Sensors can support wall mounted or placing on the table household and travel essential.

Package included:

Zigbee Co Detector*  1  PCS or 2 PCS, 3 PCS for option

Neutral gift box*1

Warmly Notice !!!

1. Our zigbee Carbon monoxide must be work with Standard Zigbee3.0 Hub/gateway,

 It CAN'T compatible with Speicial Tuya Moes zigbee gateway, it can;t compatible with xiaomi Aqara gateway either.

2. This Carobon monoxide adopt Zigbee 3.0  ZHA standard Protocol,it can be Compatible with

Home assissant with SmartThing Gateway,   deCONZ and Home Assistant,  CC2531 and zigbee2mqtt , Zigbee2MQTT and Home assistant, Athome Homey ,  Sonoff Zigbee Dongleplus Gateway+ Home Assitant ,   conbee deconz,   Zigbee2MQTT and Domoticz ,  deConz and Homebridge-Hue,  Deconz and  Homeassistant, Ziptao,  Jeedom,  KAKU, Trust 2000, Dutch Klikaanklikuit,    ICS-2000 click to click off, through the zigbee2mqtt via a cc2531 antenna .....

3. Zigbee3.0 Carbon monoxide Approved by CE and ROHS approved by SGS in Germany.

These Two Zigbee CO Detector even with the same Apperance But Built-in different zigbee moudle.

Left built in Standard Zigbee3.0  ZHA compatible with Most standard zigbee gateway such as Home assistant and zigbee2mqtt module and Other Open-source Zigbee3.0 alliance Gateway.

The Right CO Built in Special Tuya Module zigbee3.0 Only Compatible with Tuya Zigbee gateway and control by tuya Smart or Smart Life App!

So please double check what;s Version zigbee gateway do you use before You Place the Order To Make Sure Yours zigbee gateway can be compatible with our zigbee Carbon monoxide detector!!!

 You can buy more sensors to built your Smart Home or office!